SNAP FASTENERS

 

 

COMMON SENSE ®

 

This familiar turn button fastener is sturdy and positive locking. All studs are assembled with a spring attached to the knob or button, which holds it under tension until turned by hand, thereby preventing accidental opening. Distinguished from snap fasteners by this locking feature, the Common Sense meets many unusual requirements not applicable to snap fasteners. Manufacturers of trucks, military vehicles, boats, luggage, and leather goods are using this type of fastener to good advantage.

 

Studs – Brass Material – Nickel Plated                                     Some parts available in Black or Brass




XB-78322
Single Stud
Two Screw Base
Height = .683 or 17.25mm

XB-78323
Double Stud
Two Screw Base
Height =.790 or 20.06 mm

XB-78317
Single Stud
Eyelet Type
Height = .790 or 20.06mm

XB-78332
Single Stud
Two Prong Type
Height = .700 or 17.78mm

Back Plates and Washers - Brass Material




BS-78505
Washer
Use with BS-78403 or BS-78404

BS-78502
Back Plate
Use With XB-78317

BS-78507
Clinch Plate
Use With XB-78332

Back Plates and Washers - Brass Material


 









Note: Components BS-78505 & BS-78403/BS-78404
are used with all stud turn buttons


BS-78403
Eyelet
Use with BS-78505
Height = .335 or 8.51mm

BS-78404
Eyelet Long Prong
Use with BS-78505
Height = .385 or 9.78 mm